CIAT CIATControl OPC Server, Installation And Operating Instructions Manual

Page: 21 / 32

NA 12.46 A
©2012 CIAT
NA 12.46 A installation instructions [21]
V05.2012
87 Filter counter reset Alarm acknowledgement (dirty filter) 0 = No action/1 = Acknowledge Write only
88 ElectricalpowerLimitation Electric heater power limitationin % Values of 0 to 100% Write only
89 PRelChiller Relative power supplied by the production of cold waterin % values of 0 to 255% Write only
90 PRelBurner Relative power supplied by the production of hot waterin % values of 0 to 255% Write only
91
EnergyDemandAC or
DemAC ?
Cold water demand expressed in % values of 0 to 255% Read-only
92
EnergyDemandAH or
DemAH ?
Hot water demand expressed in % values of 0 to 255% Read-only
93
EnergyDemandeAir or
DemAir
Fresh air demand expressed in % 0 or 100% Read-only
94 ActPosHeatStageA Information on state of heating valve position in % Values of 0 to 100% Read-only
95 ActPosHeatStageB Information on state of electric heater position in % Values of 0 to 100% Read-only
96 ActPosCoolStageA Information on state of air conditioning valve position in % Values of 0 to 100% Read-only
97 FanSpeed Information on state of fan speedin % Values of 0 to 100% Read-only
98 ActPosFreshAir Information on state of fresh air damper position in % 0 or 100% Read-only
99 CoilConsumptionAC Cold water coil consumption in kWh Cold water coil consumption in kWh Read-only
100 CoilConsumptionAH Hot water coil consumption in kWh Hot water coil consumption in kWh Read-only
101 ElectricConsumption Electric heater consumption in kWh Electric heater consumption in kWh Read-only
102 FanConsumption Fan motor consumption in kWh Ventilation consumption in kWh Read-only
103 HVACModeEff
Mode currently being used (comfort, standby, economy, frost
protection)
0=Auto/1=Comfort/2=Stdby/3=Eco/4=Frost
prot.
Read-only
104 TempRoomSetpSetHeatEff Operating heating setpoints (comfort, standby, economy) Three temp. values in °C Read-only
105 TempRoomSetpSetCoolEff Operating air conditioning setpoints (comfort, standby,
economy)
Three temp. values in °C Read-only
106 AQSetpEff Actual air quality setpoint in ppm CO2 value in ppm Read-only
107 HumRelSetpDehumEff Actual dehumidification setpoint in % Relative humidity value in % Read-only
108 TempReturnAir Return air temperature Temp. value in °C Read-only
109 TempDischargeAir Supply air temperature Temp. value in °C Read-only
110 TempFlowWater Water temperature (local changeover) Temp. value in °C Read-only
111 PresenceStatus Presence detector (wired to controller) 0 = Unoccupied/1 = Occupied Read-only
112 WindowSwitch Synchronisation output for master/slave window switches 0 = Closed/1 = Open Read-only
113 WindowStatus Information on state of all window switches 0 = Closed/1 = Open Read-only
114 InfoOnOff Information on state of synchronised output 0 = OFF/1 = ON Read-only
115 OnOff On/Off control of switch wired to controller 0 = OFF/1 = ON Read-only
116 InAlarm Controller alarm 0 = No Alarm / 1 = Alarm Read-only
117 AlarmInfo Error code of current alarm Error code Read-only