8.4 E-mail notifications
The control system provides the option to define one or two
recipients who receive e-mail notifications each time the new
alarm occurs or all existing alarms have been reset.
IMPORTANT: E-mail notifications can be set only by
service technicians.
Connect Touch control system has many fault tracing aid
functions, protecting the unit against risks that could result in
the failure of the unit.
8.1 Control diagnostics
The user interface enables the quick display of the unit status:
The
blinking bell
icon indicates that there is an
alarm, but the
unit is still running
.
The
highlighted bell
icon indicates that the
unit
is shut down
due to a detected fault.
The local interface – Connect Touch – gives the user quick
access to monitor all unit operating conditions. If an operating
fault is detected, the alarm is triggered.
All information regarding the existing alarms (current and past
alarms) can be found in the Alarms menu.
Alarms menu
Access
Viewing alarm information
Date
Hour Code
Description
Current
Alarms
Basic
+
+
+
Alarm
History
Basic
+
+
+
Reset
Alarms
User
+
8.2 Displaying current alarms
The Current alarms menu may display up to 10 current alarms.
To access the list of currently active alarms
1. Press the
Alarm
button in the upper-right part of the screen.
2. Select
Current Alarms.
3. The list of active alarms will be displayed.
8.3 Resetting alarms
The alarm can be reset either automatically by the control or
manually through the touch panel display or the web interface
(in the Reset Alarms menu). See also section 8.5.
•
The Reset alarms menu displays up to 5 alarm codes
which are currently active on the unit.
• Alarms can be reset without stopping the machine.
• Only logged-in users can reset the alarms on the unit.
To reset the alarm manually
1. Press the
Alarm
button in the upper-right part of the screen.
2. Select
Reset Alarms
.
3. Set “Alarm Reset” to Yes.
IMPORTANT: Not all alarms can be reset by the user.
Some alarms are reset automatically when operating
conditions return to normal.
CAUTION: In the event of a power supply interrupt, the unit
restarts automatically without the need for an external
command. However, any faults active when the supply is
interrupted are saved and may in certain cases prevent
a circuit or a unit from restarting.
8 - DIAGNOSTICS
EN - 25
AQUACIAT
CALEO
