Index
Chapter 1
Introduction
19
1.1 Central Unit description...................................................................................20
1.2 Central Unit Features ......................................................................................20
Chapter 2
Installation
21
2.1 Board description (PCM100)...........................................................................21
2.1.1
Connections (PCM100) .......................................................................21
2.2 Board description (PCM130)...........................................................................22
2.2.1
Connections (PCM130) .......................................................................22
2.3 Example of installation ....................................................................................23
2.4 Connections ....................................................................................................24
2.4.1
Power supply, flasher, geared-motor, controls .....................................24
2.4.2
Installation the FX40D, FX55D,FX30D ................................................25
2.4.3
Digital relay phtocells (FX40D,FX55D) ................................................25
2.4.4
Digital photocells with autodiagnostis (FX30D) ...................................26
Chapter 3
Setup
26
3.1 Dip-switch........................................................................................................26
3.1.1
AUTOMATIC FOR PARK operating .....................................................27
3.1.2
AUTOMATIC operating ........................................................................27
3.1.3
STEP-BY-STEP WITH AUTOMATIC RECLOSING operating .............28
3.1.4
MANUAL STEP-BY-STEP WITH STOP operating...............................28
3.2 Opening time (trimmer A) ................................................................................29
3.3 Electronic clutch adjustment (trimmer A).........................................................29
3.4 Time of pause adjustment (trimmer B) ............................................................29
3.5 Electronic brake / Slowing down (trimmer C) ..................................................29
3.6 Control LEDs...................................................................................................29
3.7 Remote-control receiver setup ........................................................................30
3.8 Remote-control setup......................................................................................31
Chapter 4
Maintenance
32
4.1 Gate
.............................................................................................................32
4.2 Fuses .............................................................................................................32
PCM100 / PCM130 - User Manual
18
19
Introduction
Important Safeguards
!
Please read this manual carefully before the installation and keep it for future reference.
!
Installation, electrical connections and adjustements must comply with technical and safety standards
in force. (UNI 8612).
!
HILTRON Srl cannot be held responsible for failure to observe technical standards in the construction of gates, or for
any deformation of gates which may occur during the use.
!
This product has been designed and manufactured only for the use stated in this manual. Any other use not expressly
set forth will affect the reliability of the product and/or could be source of hazard.
!
HILTRON Srl cannot be held responsible for any damage caused by improper use or different from the use for wich the
autamtion system is destined to.
!
Do not use this device in areas subject to explosion: the presence of flammable gas or fumes is a serious hazard.
!
Before carrying out any operations, turn off the system’s main switch.
!
An omnipower switch shall be provided for the installation with an opening distance of the contacts of 3 mm or more.
Alternatively, use a 6A thermomagnetic breaker with a multi-pole switching.
!
Ensure that there is a differential switch up-line of the electrical system, with a trip threshold of 0.03A.
!
Check that the earthing plant is in perfect condition and connect it to the metallic parts. Also earth the Yellow/Green
wire of the operator.
!
The end-user must avoid any attempt to repair or adjust the automation personally. These operations must be carried
out only by qualified personnel.
!
For maintenance operations, use only CIA original spare parts produced by HILTRON Srl. Do not carry out any
modifikeptcations to automation components. Packaging materials (plastic, cardboard, etc.) are a potential hazard
and must be out of reach of children.
!
The installer must supply all informations regarding manual operation of the system in the event of an emergency and
provide the end-user with this manual attached to the product.
!
The automation is fitted with an anti-crush safety system that is a torque control device.
!
In any case, HILTRON Srl suggests the installation of others safety devices, in accordance with standards in force,
system operating logic and weight and dimension of the gate.
!
The safety devices (i.e.: photocells, pneumatic edges, etc...) protect areas wherethere is a mechanical movement
hazard (i.e.: crushing, entrapment and cutting). Each installation must be fitted with at least one flashing light (i.e.: item
LAMP12FG) or with at signalling plate (i.e.: item TRG CIA) fixed to the gate.
!
HILTRON Srl cannot be held responsible regarding safety and correct operation of the automation in the event that
parts other than CIA original parts (produced by HILTRON Srl).
