background image

Gentle Reminder:

Please read through this manual carefully before use.  
Please keep this manual for further reference.  
Please ensure proper usage based on a full understanding of this manual.

Contents

Characteristics of Smart Home System ------------------------------------------------01
Packaging List -------------------------------------------------------------------------02
Operating Principle --------------------------------------------------------------- 03-04

Categories of Detector Zones ------------------------------------------------------03
Operate Together with Multiple Smart Switch  --------------------------------------04

Introduction of Panel -------------------------------------------------------------- 05-07

Powering on the Panel  -------------------------------------------------------------06
Positioning of Panel -----------------------------------------------------------------07

Use of Accessories ---------------------------------------------------------------- 08-11

Remote Control ---------------------------------------------------------------------08
Door/Window Contact --------------------------------------------------------------09
PIR motion detector ----------------------------------------------------------------09
Smart Switch ------------------------------------------------------------------------11

Accessory Pairing /Removal ------------------------------------------------------- 11-12

Pairing Wireless Accessories  --------------------------------------------------------11
Pairing Wireless siren (requires separate purchase) ---------------------------------12
Removal of Wireless Accessories ----------------------------------------------------12
Removal of Wireless Siren (requires separate purchase) ----------------------------12

Installation of Accessories --------------------------------------------------------- 13-14

Installation of Door/Window Contact -----------------------------------------------13
Installation of PIR Motion Detector -------------------------------------------------14

App Setting and Operation ------------------------------------------------------- 15-20

Step 1: Download App --------------------------------------------------------------15
Step 2: WiFi Network Setting  -------------------------------------------------------16
Step 3: Registration  ----------------------------------------------------------------16
Step 4: App Operation --------------------------------------------------------------17

APN Settings --------------------------------------------------------------------------22
Remote Control by Phone ------------------------------------------------------------23
Restore Default Settings ---------------------------------------------------------------23
FAQs ------------------------------------------------------------------------------ 24-25

Specification

 ---------------------------------------------------------------------- 26-28

Safety Reminder ----------------------------------------------------------------------29
Maintenance and Repair --------------------------------------------------------------30
Disclaimer -----------------------------------------------------------------------------31

Summary of Contents for H4




















Reviews: