background image

Foreword

Congratulations on your purchase of the AWV Plus Alarm system. Before you com-

mence installation we recommend that you unpack the product, familiarise yourself 

with the component parts, and carefully read through this instruction guide.

There are some parts of the installation must be completed in the order shown to 

ensure successful installation.

Disclaimer

All statements, technical information and recommendations in this manual 

are believed to be reliable, but the accuracy and completeness thereof are not 

guaranteed or warranted.

The specifications and information regarding the products as shown in this 

document are subject to change without notice.

The reproduction, language translation modification, storage in a retrieval system 

or retransmission, in any form or by any means, electronic, mechanical or otherwise, 

is strictly prohibited without prior written permission.

In no event are we liable for any indirect, special, incidental, or consequential 

damages, including, without limitation, lost profits or loss or damage to data arising 

out of the use or inability to use this document.

Summary of Contents for 4260692650020

























Reviews: