Chrysler Pacifica 2021 Owner'S Manual Download Page 70

Page: 70 / 432

GETTING TO KNOW YOUR VEHICLE

EXTERIOR LIGHTS

ULTIFUNCTION

EVER

The multifunction lever is located on the left

side of the steering column. The multifunction

lever controls the turn signals, headlight high/

low beams, and flash-to-pass functions.

Multifunction Lever

EADLIGHT

WITCH

The headlight switch is located on the left side

of the instrument panel. The switch controls the

operation of the headlights, parking lights,

instrument panel lights, interior lights and the

fog lights.

Headlight Switch

From the O (off) position, rotate the headlight

switch clockwise to the first detent for parking

light and instrument panel light operation.

Rotate the headlight switch to the second

detent for headlight, parking light and

instrument panel operation.

AYTIME

UNNING

IGHTS

(DRL

) — I

QUIPPED

The headlights or LED light bars on your vehicle

will illuminate when the engine is started. This

provides a constant lights on condition until the

ignition is placed in the OFF position. If the

parking brake is applied, the Daytime Running

Lights (DRLs) will turn off.

NOTE:



For vehicles sold in Canada, the Daytime

Running Lights will automatically deactivate

when the front fog lights are turned on.



If allowed by law in the country in which the

vehicle was purchased, the Daytime Running

Lights can be turned on and off using the

Uconnect system

page 210.



On some vehicles, the Daytime Running

Lights may deactivate, or reduce intensity, on

one side of the vehicle (when a turn signal is

activated on that side), or on both sides of

the vehicle (when the hazard warning lights

are activated).

1 — Rotate Headlight Control
2 — Push Fog Light Control
3 — Ambient Light Dimmer Control
4 — Instrument Panel Dimmer Control

21_RUP_OM_EN_USC_t.book Page 68

Summary of Contents for Pacifica 2021

















































































































































































































































































































































































































































Search results

Summary of Contents for Pacifica 2021

Reviews:

Chrysler Pacifica 2021, Owner'S Manual, Page: 70 / 432

Search results

Summary of Contents for Pacifica 2021

Reviews: