Chrysler Pacifica 2021 Owner'S Manual Download Page 64

Page: 64 / 432

GETTING TO KNOW YOUR VEHICLE

ONVERSATION

IRROR

Located in the overhead console there is a

conversation mirror to view all the passengers

in the vehicle. Push the panel to release the

drop down mirror. Raise the mirror and push to

latch it back in the stowed position.

Conversation Mirror

OWER

IRRORS

— I

QUIPPED

The power mirror controls are located on the

driver-side door trim panel.

Power Mirror Controls

The power mirror controls consist of mirror

select buttons and a four-way mirror control

switch. To adjust a mirror, push either the

L (left) or R (right) to select the mirror that you

want to adjust.

NOTE:

A light in the selected button will illuminate indi

cating the mirror is activated and can be

adjusted.

Using the mirror control switch, push on any of

the four arrows for the direction that you want

the mirror to move.
Left and Right side power mirror preselected

positions can be controlled by the optional

Driver Memory Settings Feature

page 33.

UTSIDE

IRRORS

OLDING

EATURE

All outside mirrors are hinged and may be

moved either forward or rearward to resist

damage. The hinges have three detent

positions:



Full forward position



Full rearward position



Normal position

1 — Left Mirror Select
2 — Right Mirror Select
3 — Mirror Control Switch

21_RUP_OM_EN_USC_t.book Page 62

Summary of Contents for Pacifica 2021

















































































































































































































































































































































































































































Search results

Summary of Contents for Pacifica 2021

Reviews:

Chrysler Pacifica 2021, Owner'S Manual, Page: 64 / 432

Search results

Summary of Contents for Pacifica 2021

Reviews: