Chrysler Pacifica 2021 Owner'S Manual Download Page 219

Page: 219 / 432

MULTIMEDIA

217

Units

After pressing the Units button on the touchscreen, the following settings will be available:

Control Screen Timeout

This setting allows you to set the Control Screen to turn off automatically

after five seconds or stay open until manually closed.

Navigation Next Turn Pop-Ups Displayed in Cluster

This setting will display navigation prompts in the Instrument Cluster Display.

Phone Pop-Ups Displayed In Cluster

This setting will display smartphone notifications and messages in the

Instrument Cluster Display.

Ready To Drive Pop-Ups — If Equipped

This setting will enable the Ready To Drive Pop-Ups in the Instrument

Cluster Display.

Setting Name

Description

Setting Name

Description

Units

This setting changes the “Speed” (MPH or km/h), “Distance” (mi or km),

“Fuel Consumption” (MPG [US], MPG [UK], L/100 km, or km/L),

“Pressure” (psi, kPa, or bar), “Temperature” (°C or °F), and “Capacity”

(Gal [US], Gal [UK], or L) units of measurement independently.

21_RUP_OM_EN_USC_t.book Page 217

Summary of Contents for Pacifica 2021

















































































































































































































































































































































































































































Search results

Summary of Contents for Pacifica 2021

Reviews:

Chrysler Pacifica 2021, Owner'S Manual, Page: 219 / 432

Search results

Summary of Contents for Pacifica 2021

Reviews: