Chrysler Pacifica 2021 Owner'S Manual Download Page 223

Page: 223 / 432

MULTIMEDIA

221

ParkSense

This setting will change the type of ParkSense alert when a close object is

detected. The “Sound Only” setting will provide an audible chime when

an object is detected. The “Sound and Display” setting will provide both

an audible chime and a visual display when an object is detected.

Front ParkSense Volume

This setting adjusts the volume of the Front ParkSense system. The

available settings are “Low”, “Medium”, and “High”.

Rear ParkSense Volume

This setting adjusts the volume of the Rear ParkSense system. The

available settings are “Low”, “Medium”, and “High”.

Rear ParkSense Braking Assist

This setting will turn the Rear ParkSense Braking Assist on or off.

Sliding Door Alert

This setting will turn the Sliding Door Alert on and off.

Blind Spot Alert

This setting will change the type of alert provided when an object is

detected in a vehicle’s blind spot. The “Off” setting will turn off Blind Spot

Alert. The “Lights” setting will activate the Blind Spot Alert lights on the

outside mirrors. The “Lights & Chime” setting will activate both the lights

on the outside mirrors and an audible chime.

Hill Start Assist

This setting will turn the Hill Start Assist system on or off.

KeySense

This setting will access KeySense features.

Setting Name

Description

21_RUP_OM_EN_USC_t.book Page 221

Summary of Contents for Pacifica 2021

















































































































































































































































































































































































































































Search results

Summary of Contents for Pacifica 2021

Reviews:

Chrysler Pacifica 2021, Owner'S Manual, Page: 223 / 432

Search results

Summary of Contents for Pacifica 2021

Reviews: