Chrysler 2008 PT Cruiser Owner'S Manual Download Page 93

Page: 93 / 491

Head/Thorax airbags (if equipped) are located inside the
driver and front passenger seats, and their covers are also
labeled SRS AIRBAG.

NOTE:

Airbag covers may not be obvious in the interior

trim; but they will open to allow airbag deployment.

WARNING!

•

Do not drill, cut or tamper with the knee blocker
panel in any way.

•

Do not mount any accessories to the knee blocker
panel such as alarm lights, stereos, citizens band
radios etc.

SRS Airbag Label

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2008 PT Cruiser












































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 PT Cruiser

Reviews:

Related manuals for 2008 PT Cruiser

Brands by name

Popular brands

Chrysler 2008 PT Cruiser, Owner'S Manual

Search results

Summary of Contents for 2008 PT Cruiser

Reviews:

Related manuals for 2008 PT Cruiser

Brands by name

Popular brands