Chrysler 2008 PT Cruiser Owner'S Manual Download Page 71 | Manualshive

Page: 71 / 491

Chrysler 2008 PT Cruiser Owner'S Manual Download Page 71

WARNING!

Do not attempt to modify any part of your advanced
airbag system. The airbag may inflate accidentally or
may not function properly if modifications are made.
Take your vehicle to an authorized dealer for any
advanced airbag system service. If your seat includ-
ing your trim cover and cushion needs to be serviced
in any way (including removal or loosening/
tightening of seat attachment bolts), take the vehicle
to your authorized dealer. Only manufacturer ap-
proved seat accessories may be used. If it is necessary
to modify an advanced airbag system for persons
with disabilities, contact your authorized dealer.

WARNING!

•

Do not place or hang any items such as add-on
video players on the front seat backs. The addi-
tional weight may cause the Occupant Classifica-
tion System to be unable to correctly classify the
right front occupant. This could allow the passen-
ger frontal airbag to inflate when it is not desired.

•

You need proper knee impact protection in a
collision. Do not mount or locate any aftermarket
equipment on or behind the knee blocker panel.

•

It is dangerous to try to repair any part of the
airbag system yourself. Be sure to tell anyone who
works on your vehicle that it has an airbag system.

NOTE:

Perchlorate Material – special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

69

2

«
...
69
70
71
72
73
...
»

Summary of Contents for 2008 PT Cruiser












































































































































































































































































































































































































































































































Reviews:

No comments