Chrysler 2006 Town and Country Instruction Manual Download Page 75 | Manualshive

Page: 75 / 496

Chrysler 2006 Town and Country Instruction Manual Download Page 75

When using the tether anchorages in the outboard seat-
ing positions, ensure that the strap is routed over the top
of the seatback and under the head restraint between the
head restraint posts. Except for bench seats with split
seatbacks, when the tether anchorage is used in the center
seating position, the strap should be positioned straight

over the top of the seatback. For bench seats with split
seatbacks, route the tether between the seatbacks.

When using the tether anchorages in the center position
on 3rd row fold-in-floor seating, ensure that the strap is
routed over the top of the seatback and under the head
restraint between the head restraint posts.

Latch Anchorages

Tether Strap Mounting

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

75

2

«
...
73
74
75
76
77
...
»

Summary of Contents for 2006 Town and Country

















































































































































































































































































































































































































































































































Reviews:

No comments