Chrysler 2006 Town and Country Instruction Manual Download Page 24 | Manualshive

Page: 24 / 496

Chrysler 2006 Town and Country Instruction Manual Download Page 24

To Open/Close Left Power Sliding Door — If
Equipped

Press the LEFT button twice within five seconds to
open/close the left power sliding door. If the button is
pushed while the door is being power closed, the door
will reverse to the full open position.

If the vehicle is not equipped with a left power sliding
door and the door is closed and locked, pressing the
button twice will result in the left side doors becoming
unlocked.

To Open/Close Right Power Sliding Door — If
Equipped

Press the RIGHT button twice within five seconds to
open/close the right power sliding door. If the button is
pushed while the door is being power closed, the door
will reverse to the full open position.

If the vehicle is not equipped with a right power sliding
door and the door is closed and locked, pressing the
button twice will result in the right side doors becoming
unlocked.

To Turn Off “Flash Lights On Lock/Unlock” — If
Equipped

If desired, the “Flash Lights On Lock/Unlock” feature
can be turned on and off by performing the following
procedure:

1. Press the LOCK button for 5 to 10 seconds.

2. While the LOCK button is pressed, (after 5 seconds)
press the UNLOCK button. Release both buttons.

The “Flash Lights On Lock/Unlock” feature can be
reactivated by repeating this procedure or by performing
the procedure in the Electronic Vehicle Information Cen-
ter (EVIC), Customer Programmable Features section on

24

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
22
23
24
25
26
...
»

Summary of Contents for 2006 Town and Country

















































































































































































































































































































































































































































































































Reviews:

No comments