Chrysler 2006 Town and Country Instruction Manual Download Page 38 | Manualshive

Page: 38 / 496

Chrysler 2006 Town and Country Instruction Manual Download Page 38

Gas props support the liftgate in the open position.
However, because the gas pressure drops with tempera-
ture, it may be necessary to assist the props when
opening the liftgate in cold weather.

SEAT STORAGE BIN SAFETY WARNING

WARNING!

Always close the storage bin covers when your
vehicle is unattended. Do not allow children to have
access to the 2nd row seat storage bins. Once in the
storage bin, young children may not be able to
escape. If trapped in the storage bin, children can die
from suffocation or heat stroke.

Storage Bin Cover Emergency Release

As a security measure, a Storage Bin Cover Emergency
Release strap is built into the storage bin cover latching
mechanism.

Storage Bin Cover Emergency Release

38

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
36
37
38
39
40
...
»

Summary of Contents for 2006 Town and Country

















































































































































































































































































































































































































































































































Reviews:

No comments