Christopeit Sport 2006, Assembly And Exercise Instructions

Page: 17 / 56

17
GB
The supplied computer allows the most convenient training. Every va -
lue relevant to training is displayed in a corresponding window.
From the beginning of the training session, the required time, the cur -
rent speed, the approximate calorie consumption, the travelled distan -
ce ad the current pulse rate are displayed. All values are counted from
zero upwards. If you wish to see one value displayed constantly du -
ring training, select this with the „F“ key. If you wish to see these va -
lues in constant alternation, select the „SCAN“ function. The display
then changes from one function to the next at intervals of approx. 6
seconds.
The computer is switched on by briefly pressing the F- key or simply
by beginning training. The computer begins to register and display all
values. To stop the computer, just stop training. The computer stops all
measurements and retains the last attained values. The last attained
values in the functions TIME, CALORIES and KM are stored and training
can continue with these values when training is resumed.
The computer switches of automatically approx. 4 minutes after trai -
ning is stopped. All values attained until that time are stored and are
displayed again when training is resumed. It is then possible to con -
tinue training from these values or to reset all functions to zero using
the L- key.
DISPLAYS:
1.„SPEED“ (KM/H) display:
The current speed is displayed in kilometres per hour. It is not possible
to specify a particular value using the „E“ key. The values last attained
by this function are not stored. (Limit of the display: 999.9 km/h.)
2.„TIME“ (ZEIT) display:
The currently required time is displayed in minutes and seconds. It is
possible to specify a particular value using the „E“ key. If a particular
time has been specified, the remaining time is displayed. When the
specified value is attained, this is indicated by an acoustic signal. The
values last attained by this function are stored. (Limit of the display:
99 minutes.)
3.„DIST (KM)“ display:
The current status of the travelled distance is displayed. It is possible to
specify a particular value using the „E“ key. If a particular distance has
been specified, the remaining distance is displayed. When the specified
value is attained, this is indicated by an acoustic signal. The values last
attained by this function are stored. (Limit of the display: 999,9 km.)
4.„CALORY“ (CAL) display:
The current status of the consumed calories is displayed. It is possible
to specify a particular value using the „E“ key. If a particular consump -
tion has been specified, the remaining number of calories to be consu -
med is displayed. When the specified value is attained, this is indicated
by anacoustic signal. The values last attained by this function are sto -
red. (Limitof the display: 999,0 calories.)
5.„PULSE“ display:
The current pulse rate is displayed in beats per minute. It is possible to -
specify a particular value using the „E“ key.
The values last attained by this function are not stored. (Limit of both
displays:40 – 240 pulse beats per minute.)
Note:
For pulse measurement, the two contact surfaces of the pulse measu -
ring handle unit must be gripped simultaneously. The contact surfaces
should be located centrally in the palms of the hands.
6.„SCAN“ function:
If this function is selected, the current values of all functions are di -
splayed successively in a constant sequence approx. every 5 seconds.
7.„STOP“ display:
Display of Stopmode. Presets can be set.
KEYS:
1.„F“ key (Fuction):
Pressing this key once briefly makes it possible to change from one
function to another, i.e. the respective functions can be selected for
which entries can be made using the „E“ key. The currently selected
function is indicatedin the window.
2.„E“ key (Enter):
By pressing this key once, it is possible to specify values step by step
in the respective functions. For this, the desired function must firstly
be selected using the „F“ key. Holding the key pressed activates faster
running. When training begins, the specified values are then counted
down to zero.
3.„L“-key = (Delete):
When this key is pressed briefly, the values chosen with the „F“ key are
reset to zero. If the key is held longer (approx. 3 seconds), all last attai -
ned values are deleted.
Replacing the batteries:
1. Open the battery compartment cover and then remove the used
Batteries.(If the batteries should leak remove them under increased
considering that the battery acid is not into contact with skin come and
clean the battery compartment thoroughly.)
2. Insert the new batteries (type (AAA) 1.5 V in the correct order and
taking into account the polarity in the battery compartment and close
the batterycover so that it clicks into place.
3.
If the computer does not pick up immediately, the function should
batteries are removed for 10 seconds and re-inserted.
4. The empty batteries properly in accordance with the disposal regula
tions disposed of and do not give residual waste.
Battery compartment
AAA batteries
COMPUTER INSTRUCTIONS