#
Status
State Value
Description
117 Laser Standby Hours
<standby hours>
Displays the hours spent by the LOS in
Standby mode. These hours are not the
same as the projector standby hours.
118 Laser On Hours
<laser on hours>
Displays the laser on hours.
119 Laser On Cycles
<count>
Displays the number of cycles the lasers
were turned on from off.
120 UCD MFG Calibration
OK
UCD calibrations are OK.
Warning
One or more UCDs are missing
calibration.
121 LOS Dewpoint
OK
Displays the dew point inside the LOS.
Approaching limit
User dew point (set using Max Ambient
Temperature) is approaching the LOS
dew point.
Reached limit
User dew point (set using Max Ambient
Temperature) has reached the LOS dew
point. Brightness may be reduced.
122 Laser Boot SW Version
<version>
Version is OK.
<invalid version number>
A version mismatch exists.
123 Laser Main SW Version
<version>
Version is OK.
<invalid version number>
A version mismatch exists.
124 Laser UCD SW Version
<version>
UCD version is OK.
<invalid version number>
At least one UCD version mismatch
exists (upgrade failed).
125 Laser HKB FPGA Version
<version>
Housekeeping board (HKB) FPGA version
is OK.
<invalid version number>
A housekeeping board (HKB) FPGA
version mismatch exists.
126 Laser HKB HW Version
<type>.<version>.<mod>
Housekeeping board (HKB) hardware
version is OK.
<invalid version number>
A housekeeping board (HKB) hardware
version mismatch exists.
127 Laser CSB HW Version
<type>.<version>.<mod>
Color sensor board (CSB) hardware
version is OK.
Christie status system
Christie Technical Reference–Status System
15
020-103327-03 Rev. 1 (04-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.