Terra Manager
Terra User Manual
45
020-102838-10 Rev. 1 (05-2020)
Copyright
©
2020 Christie Digital Systems USA Inc. All rights reserved.
Configuration Page: Create Devices in Offline Mode
On the Configuration page, you can create virtual devices to work in offline mode. When created, the
list of Receivers and Transmitters is updated. View the list of receivers on the Configuration page.
View the list of transmitters on the Operation Mode page.
1.
Click
Add Virtual Devices
.
2.
Specify the number of devices to create.
3.
Click
Create
.
For additional information about working in offline mode, refer to
Devices Setup Subpage: Tabs
The Device Setup subpage has additional tabs at the bottom of the subpage to set or review additional
settings for the selected device(s). Some properties are editable, and some are display only.
If more than one device is selected and the properties differ between the devices, N/A
is displayed for the properties.
When a change is made on a tab, an asterisk is displayed to notify the user of
unsaved changes.
For transmitters, these include settings for IP address, input types, front panel buttons, LEDs,
hardware, firmware, and groups.
For receivers, these include settings for IP address, front panel buttons, LEDs, hardware, and
firmware.
Use the tabs near the bottom of the Devices Setup subpage to modify settings for the selected
devices.
1.
Select the devices you want to modify by clicking on the device.
To select more than one adjacent item in the list, click the first item and hold down
the SHIFT key and select the last item, then release the SHIFT key.
To select non-adjacent items in the list, hold down the Ctrl key and click all the items
you want to select, then release the Ctrl key.
2.
Click the desired tab near the bottom of the Devices Setup tab.
3.
Refer to
(page
) to make your selections.
4.
Click
Save All
.
Devices Properties Tabs
The device properties are available on the tabs on the bottom of the Devices page. Some properties
are editable, and some are informational only.
Devices Setup Subpage
Network Tab (TX and RX)
Use to set network settings.
