3. Enable the AutoPlay option.
4. To exit the menu, on the remote, press Menu.
Displaying an image when no signal is detected
Set the behavior of the display panel when no signal is detected from the selected input source.
1. In the display panel menu, select Signage Settings > No Signal.
2. To set the display panel to check the connected USB devices for available files to play, select
Failover.
If no playable files are available or there is no USB device connected to the display panel, the
No Signal image is displayed and the display panel turns off after five minutes.
If the No Signal image is not available, the message "No Signal OSD" is displayed on the
screen, and the display panel turns off after five minutes.
Playing content on the display panels
Secure Series LCD Panels Installation and Setup Guide–SUHD551-L, SUHD651-L, SUHD751-P, SUHD861-P
21
020-001660-02 Rev. 1 (02-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Secure Series
Page 34: ......