The boot logo is updated.
8. Restart the display panel.
Upgrading the firmware from USB
Install the new firmware to upgrade the display panels.
1. Download the latest software from www.christiedigital.com and unzip the file.
2. Navigate to
core_update/secure_<version number>_mb120.bin
.
3. Copy the
secure_<version number>_mb120.bin
file to the root of a USB storage device.
4. On the USB storage device, rename the file to
upgrade_mb120.bin
.
5. Connect the USB storage device to the display panel.
6. If the Media Browser is displayed, to close it press Exit on the remote.
7. On the display panel remote, press Menu > 1505.
8. In the confirmation dialog, select Yes.
During the upgrade process the display panel restarts. After the display panel restarts, while
the upgrade finishes nothing is displayed on the panel and a red LED blinks in the top right
corner. The process may take a few minutes to complete.
Disabling the remote control
Turn off the ability to control the display panel using the remote control.
The remote control functions in Stand-By mode independently from this setting.
1. On the display panel remote, press Menu.
2. Select Signage Settings > Controls > RCU Inhibit and select On.
If this option is set as On only the Volume Up/Down, Numeric Buttons, and the Standby button
on the remote are functional.
3. To enable the remote, press MENU > 1973 on the remote control keypad.
4. Select Signage Settings > Controls > RCU Inhibit and select Off.
Using the Crestron RoomView Control tool
Crestron RoomView provides a central monitoring station for 250+ control systems on a single
Ethernet network (more are possible, the number depends on the combination of IP ID and IP
address).
Crestron RoomView monitors each projector, including projector’s online status, system power, light
source life, network setting and hardware faults, plus any custom attribute as defined by the
Administrator. The Administrator can add, delete, or edit room information, contact information and
events, which are logged automatically by the software for all users.
Crestron RoomView functions are set according to the models and specifications of the product.
For further information, visit http://www.crestron.com and http://www.crestron.com/getroomview.
Installing a display panel
Secure Series LCD Panels Installation and Setup Guide–SUHD551-L, SUHD651-L, SUHD751-P, SUHD861-P
18
020-001660-02 Rev. 1 (02-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for Secure Series
Page 34: ......