5 : M a i n t e n a n c e
CHRISTIE DIGITAL SYSTEMS
CineX35 Projector
5-4
May, 2004
1: Inner Belt
(598931-177)
2: Roller, Inner Belt
Tensioner
(194782-001)
3: Locking Screw, Inner
Belt Tensioner
(515500-105)
4: Inner Belt Tensioner
(196056-001)
5: Sprocket Pulley
(Upper and Lower)
(197517-001)
6: Small Pulley
(16teeth)
(197512-001)
7: Shutter Drive Assy
See Figure B-6
(197137-XXX)
Figure 5-3: Inner Belt
5 . 4 . 4 . S
H U T T E R
T
I M I N G
B
E L T
Refer to Figure 5-4 below.
1. Remove trap and gate assembly (refer to Section 5.4.1)
2. Remove shutter belt cover (item 8 refer to Figure 2-2 on page 2-2).
3. Loosen three Allen head screws securing jack-shaft assembly to mainframe (item 5 in
Figure 5-4) from non-operating side of projector.
4. Pull jack-shaft assembly down approximately 0.5 inch.
5. Remove shutter timing belt (item 1 in Figure 5-4).