Command
Description
Values
This command is only available if video electronics are
on.
ITP+RMPL <grey
level>
Defines the starting (top/left) grey-level used for the
Horizontal Ramp, Vertical Ramp, and Diagonal Ramp
test patterns.
This setting has no effect when the ramp is moving
(such as ITP+RMPM is non-zero).
This command is only available if video electronics are
on.
0 to 4095
0 (Default)
ITP+GRDP <pitch>
Defines the spacing between lines used for the Square
Grid and Diagonal Grid test patterns.
This command is only available if video electronics are
on.
2 to 127
32 (Default)
ITP+GRDC <0 | 1>
Enables multi-color or white-on-black grids for the
Square Grid or Diagonal Grid test patterns.
This command is only available if video electronics are
on.
0 = White-on-black
1 = Multi-color (Default)
ITP+GRDM <0 | 1>
Enables moving or static grid for the Square Grid or
Diagonal Grid test patterns.
This command is only available if video electronics are
on.
0 = Static (Default)
1 = Moving
KEN–Keypad Enable
Enables or disables the IR or wired keypad sensors.
Commands
Command
Description
Values
KEN+FRNT <0 | 1>
Enables or disables the IR keypad sensor.
(Saved value)
0 = Disables the front IR keypad sensor
1 = Enables the front IR keypad sensor
(Default)
KEN+REAR <0 | 1>
Enables or disables the rear IR keypad
sensor. (Saved value)
0 = Disables the rear IR keypad sensor
1 = Enables the rear IR keypad sensor
(Default)
KEN+WIRE <0 | 1>
Enables or disables the wired keypad sensor.
(Saved value)
0 = Disables the wired keypad jack
1 = Enables the wired keypad jack (Default)
KEN+HDBT <0 | 1>
Enables IR over HDBaseT. (Saved value)
0 = Disables IR over HDBaseT (Default)
1 = Enables IR over HDBaseT
Serial API commands
Boxer 4K Serial API Commands Technical Reference
32
020-101697-05 Rev. 1 (07-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.
