Commands
Command
Description
Values
WRP+SLCT?
Retrieves a list of available warp maps.
(Read-only)
—
WRP+SLCT <value>
Changes the warp map to use on the
projector. This command is only available if
video electronics are on. (Saved value)
0 = Turns off warping
1 to 4 = Selects one of four warp maps, if
available
11 = Selects onboard keystone correction
mode
ZOM–Lens Zoom Position Adjustment
Sets the lens zoom.
This command requires a zoom motor on the lens for it to work and is only available when the
projector is on.
Commands
Command
Description
Values
ZOM <position>
Adjusts the lens zoom to the specified
position. The position is persistent across AC
cycles.
position = A numerical value that is subject
to the range returned in ZOM?m
ZOM?m
Returns the current minimum and maximum
values for the zoom position based on the
last lens calibration performed. The returned
range is persistent across AC cycles.
—
Examples
Get the current minimum and maximum values for the zoom axis:
(ZOM?m)
Move the lens to position 500 for the zoom motor:
(ZOM 500)
Serial API commands
Boxer 4K Serial API Commands Technical Reference
49
020-101697-05 Rev. 1 (07-2017)
Copyright
©
2017 Christie Digital Systems USA Inc. All rights reserved.