Command
Description
Values
ITP+GREY <grey
level>
Defines the shade of grey for the Flat Grey test pattern.
This command is only available if video electronics are
on.
0 to 4095
2048 (Default)
ITP+RMPL <grey
level>
Defines the starting (top/left) grey-level used for the
Horizontal Ramp, Vertical Ramp, and Diagonal Ramp
test patterns.
This setting has no effect when the ramp is moving
(such as ITP+RMPM is non-zero).
This command is only available if video electronics are
on.
0 to 4095
0 (Default)
ITP+RMPM <speed>
Defines the motion speed used for the Horizontal Ramp,
Vertical Ramp, and Diagonal Ramp test patterns.
This command is only available if video electronics are
on.
0 to 100
0 (Default)
ITP+RMPS <slope>
Defines the slope used for the Horizontal Ramp, Vertical
Ramp, and Diagonal Ramp test patterns.
This command is only available if video electronics are
on.
-10 to 10
1 (Default)
Examples
Disable test patterns:
(ITP 0)
Set the test pattern to the grid pattern:
(ITP 1)
Enable a moving grid test pattern:
(ITP+GRDM 1)
KEN–Keypad Enable
Enables or disables the IR or wired keypad sensors.
Commands
Command
Description
Values
KEN+FRNT <0 | 1>
Enables or disables the IR keypad sensor.
(Saved value)
0 = Disables the front IR keypad sensor
1 = Enables the front IR keypad sensor
(Default)
KEN+REAR <0 | 1>
Enables or disables the rear IR keypad
sensor. (Saved value)
0 = Disables the rear IR keypad sensor
1 = Enables the rear IR keypad sensor
(Default)
Serial API commands
Christie Technical Reference–Serial Commands
38
020-103316-07 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
