Serial API commands
The Christie commands can be used to modify product settings.
ADR–Projector Address
Sets or queries the device address.
This command also helps to identify where a response or asynchronous message originates from.
Generally, this command is used for projectors that are daisy-chained together using the RS232 style
communication.
Commands
Command
Description
Values
ADR?
Checks the current projector address.
(Read-only)
—
ADR <value>
Sets the projector address to <value>.
(Saved value)
0 to 999
65535 = Reserved broadcast address
Examples
Set all devices to address 0:
(65535 ADR 0)
Set first device at address 0 to address to 5:
(0 ADR 5)
Query address for all devices and return results to address 1001:
(65535 1001ADR?)
Result:
(01001 00005ADR!005)
APW–Auto Power On
Automatically powers up the projector to the on state if the projector was on when the AC power was
lost.
Only applies to: Christie M RGB Series and Griffyn Series
Christie Technical Reference–Serial Commands
15
020-103316-07 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
