3 : O p e r a t i n g t h e P r o j e c t o r
CHRISTIE INC.
CHRISTIE INC. -
-
35/70 Service/PM Manual
July, 1997
H 1 : T h e P L A Y C U R R E N T S H O W C o m m a n d [ O P , L ]
This operational command causes the system to play the current show. The command should be issued from a cue point.
Use this command instead of the
FORWARD
command to operate projectors configured for MASTER/SLAVE
operation.
E
NTRY
:
<CMD-H>, <1>
C
ODE
:
H1
A
CTION
S
:
1. Play current show.
2. Stop at tail of show.
3. Wait for
SET NEXT SHOW
command (see Section 0).
S
TATUS
:
Set to
1
while moving to first frame.
Set to
3
while playing (douser open).
Set to
0
when stopped at end of show.
H 2 : T h e S E T G O T O C o m m a n d [ D X ]
This diagnostic command allows the user to enter a goto point for a subsequent
GOTO
action. The goto point must be a
frame counter value in the current show. This command is used for motion programming, and is not a normal part of
system operations.
E
NTRY
:
<CMD-H>, <2>
C
ODE
:
H2
I
NPUT
:
1. Enter the desired goto point with the numeric portion of the
keypad. This is entered in the counter format
hh:mm:ss:ff
(see Section 0).
2. Hit the <ENTER> key.
A
CTION
S
:
Load the goto point value.
S
TATUS
:
Unchanged.
