DPF-300
INSTRUCTION MANUAL
Page 9
2020.09
The milling head consists of a bedplate and a mounting head on which a hardened ground steel inter-
changeable guide is installed (Fig.4).
The guide features a central slot along which the milling cutter moves. PCB dust is removed through the rear
vacuum pipe that is connected to the electric extraction system and the corresponding dust filter; the first
section of the pipe is made of stainless steel and then it continues with a black antistatic rubber tube.
Additional suction hose with built-in valve is located on the top right corner of the workbench (Fig. 5), used
to clean the workbench from any dust residues.
An ORANGE (Fig.6) indicator light that turns on when the machine is running is located on the top left
corner.
INTERCHANGEABLE
GUIDE
MILLING
BIT
STAINLESS
STEEL
SUCTION
TUBE
MOUNTING
HEAD
Fig. 4
Fig. 6
ADDITIONAL
SUCTION
HOSE
VALVE
ANTISTATIC
SUCTION
HOSE
INDICATOR
LIGHT
Fig. 5
BEDPLATE