DPF-300
INSTRUCTION MANUAL
Page 4
2020.09
1. SAFETY RULES
1.1 MEANING OF THE SYMBOLS USED IN THIS MANUAL
An exclamation mark in an equilateral triangle indicates that there are work
or maintenance instructions to be observed or situations that are or may
become particularly dangerous.
The type of risk to which the operator is subject to and the level of skill
required is also indicated.
1.2 GENERAL REQUIREMENTS
Before performing any maintenance or adjustment work, make sure that the
power supply system is disconnected.
ATTENTION:
American HAKKO Products, Inc. declines any liability for damages caused by the
removal or modification, without authorization, of parts of the machine; it is also prohibited to
carry out maintenance or adjustment during use of the machine.
The machine must be used exclusively for depaneling of FR4 or ALUMINIUM circuit board. Any
other use is therefore prohibited and results in the immediate termination of the warranty on
the product.
Comply with the instruction and warning labels on the machine.
The machine is built according to the safety criteria dictated by current regulations, indicated in the
declaration of conformity attached to this manual.
1.3 IDENTIFICATION PLATES ON THE MACHINE
DPF-300 MACHINE DATA PLATE
It is the identification plate of the machine, bearing
its main specifications and its Serial Number.
Located at the back of the machine.
Fig. 1
Mod.
DPF-300
S/N
0000
73 kg
115 V
-
60 Hz
17 A
1 kW