DPF-300
INSTRUCTION MANUAL
Page 14
2020.09
6. USING THE MACHINE
Once the machine has been installed correctly (Section 4) and the appropriate interchangeable guide and bit
have been inserted (Section 5), the machine can be operated from the front control panel Fig.10.
CONTROL PANEL
Switching on the machine
Switch on the machine by turning the disconnect switch clockwise (the white
power indicator light turns on) and then press the green button
I
on the switch to start
the machine (the ORANGE indicator light on the workbench and the switch light turn on).
Switching off the machine
Stop the machine by pressing the red button
O
on the switch.
Turn the disconnect switch counterclockwise to disconnect the machine
from the power grid.
In case of immediate danger, press the EMERGENCY button.
To connect the operator's wristband to the ESD system, use the banana connector on the right.
WARNING!
ALWAYS KEEP FINGERS AWAY FROM CUTTER POI
NT “A”
SHOWN IN FIGURE 11
.
The operator must acquire a minimum of “practice” in order to use the machine correctly and satisfactorily.
A
Fig. 11
Fig. 10
DISCONNECT
SWITCH
POWER
INDICATOR
LIGHT
EMERGENCY
BUTTON
ESD
CONNECTION
PORT
MACHINE ON/OFF
SWITCH
Always wear safety goggles, protective gloves and safety earmuffs when
using the machine.