57" Endura
®
Flush Mount Fan Installation & Operator’s
Fan Shroud Assembly (Unassembled version)
MV2423F
17
Installing the Orifice Frame
Cone Installation
(53416)
(46764) 5/16 Flg. Nut
(46764)
(53611)
Frame Bracket
(54287)
(54287) 5/16-18 x 1.00
Important! Line up the seam in the Orifice Frame
with one of the rounded tabs on the Cone.
Rounded Tab on the Cone
Orifice Frame
SS Shldr. Bolt
Important!
Before installing a Cone on assembled fan models do either
A or B
below
.
A: Remove the Doors (Below):
To remove the Doors Pull near the center of the Door to allow the
Door Pins to slide out of the top Door Pivot Bracket. Once the Door is clear of the Top Pivot Bracket
lift it from the Bottom Pivot Plate and set aside somewhere safe to be reinstalled later.
B: Clamp the Doors (Right)
Clamp
