VER.1.3
PULSE OXIMETER OPERATOR＇
S MANUAL
5
z
Obstructions or dirt on the sensor’s red light or detector may cause a
sensor failure. Make sure there are no obstructions and the sensor is
clean.
z
For routine equipment maintenance, please refer to the service
procedures at the associated section as indicated in the manual.
z
As to the other concerns for attention, please carefully look through
the specific chapter in this instruction.
1.3 Electromagnetism interference
This oximeter is designed and tested in compliance with the EMC
standard, complying with the international standard for the EMC of the
electronic medical device - IEC 60601-1-2. However, because of the
proliferation of radio frequency transmitting equipment and other
sources of electrical noise in the health-care and home environments
(e.g. cellular phones, mobile two-way radios, electrical appliances) it is
possible that high levels of such interference due to close proximity or
strength of a source, may result in disruption of performance of this
device.
This apparatus complies with the IEC 60601-1-2 international standard.
The requirements of this international standard are: CISPR11, GROP1,
and CLASS B
1.4 Equipment classification
1.5 Accessory
1. Two AA batteries
2. One operator’s manual
Summary of Contents for MD300K
Page 1: ......