VER.1.3
PULSE OXIMETER OPERATOR＇
S MANUAL
19
parts and it is the important guarantee for our company to perform
maintenance service. If user did not do according to the below
stipulation and lead to oximeter failure and possible health damage, our
company is entitled to change guarantee time.
a
）
Should constitute effective maintenance plan for oximeter and reused
supplies. This plan includes inspection and clearance and must comply
with the policy of epidemical control unit or health department.
b
）
Please take out battery before cleaning the oximter.
c
）
Should make regular clearance. (Must comply with the policy of
epidemical control unit or health department) The appearance of
oximeter can be cleared by not-denuded wet cloth. Please use the
following permitted solution:
Ammonia (diluted)
Glutaraldehyde
Javel bleacher (diluted)
Mild soap water (diluted)
Please comply with the following regulations to avoid oximeter
damage:
Comply with diluted solution advised by manufacturer all the time
Wipe up all clearance solution by dry cloth after clearance all the time
Shouldn’t use such clearance with wax.
Shouldn’t use or spurt any clearance solution on oximeter and permit
liquid flow into the back of power supply, connector or any air channel in
oximeter.
Shouldn’t use the following cleanser:
○
Any kind of scrub solution or impregnant
○
Acet
○
Ketone , Lycine
○
Cleanser with alcohol
d
）
Please note during operation:
Should take probe and take good care of it after operating oximeter
If not used for long time please take out battery.
e
）
Battery maintenance
Please take out battery if you will not use the oximeter for a long time.
Please charge the battery fully if you will not use it for a long time.
Please charge over 14 hours at first time, or will reduce the battery life.
If occurs any abnormal phenomena, should stop using immediately and
Summary of Contents for MD300K
Page 1: ......