VER.1.3
PULSE OXIMETER OPERATOR＇
S MANUAL
14
Note
：
Pulse sensor should obviate the light source, e.g. radial
lamp or infrared lamp.
6 History Data reviewing
6.1 Character Definition:
: The user’s SpO2.
: The user’s pulse rate.
: The user’s ID number.
: The minute of the history data.
: The hour of the history data.
: The date of the history data.
: The month of the history data.
: The year of the history data.
6.2 Reviewing operation:
In the measuring picture press the menu button for
one time you can enter into the data reviewing
picture shown as the Fig 10. And then press the
up
or down
button, you can review the last
user’s SpO2, PR, ID and the minute, hour, data,
month and year of measuring. The measuring data
is recorded every four seconds, so press the right
or
left button, you can get the data of other
four seconds.
7 ID setting
Please refer to the “4 Setting ID, Date and time”
CAUSION: If user wants to save the measurement value, should setup
the ID number first.
WARNING!
z
If user wants to save the history measurement value, should setup ID
number first.
z
The ID number is from 0-127, If change a patient, user should setup
a new ID number to part the last patient
Fig.10
Summary of Contents for MD300K
Page 1: ......