Chocolate3 Choc mate 2, User Manual

Page: 32 / 88

Page 32
4.7.4. Wireless direct connection (hotspot)
We recommend switching off the access point
Never activate AP , when it is not in use (e.g.
when connecting via an existing network).
We also strongly recommend changing the
password for the access point when it is in
use.
Set the correct region for your country and change
the mode to
Always enable AP to always enable the Access Pont.
Enable AP when not connected And to activate the
access point only if no WLAN connection is possible
otherwise.
The wireless network of the access point is named
by default
ChocMate2-******
****** corresponds to the last 6 characters of the serial
number*.
The default password is
123456
Navigate to Home -> Settings -> WLAN -> More (in
the left sidebar)
*: The serial number can be found on your invoice, the packaging of the choc mate 2 and the type plate on the
back of the printer.