9
instAllAtion
• Remove all packaging from the machine and remove the vibrating table (14) from the back of the machine.
Take off the plexiglass lid (19) and make sure nothing prevents the arm from rotating.
• Clean the machine as described on p.11
• Connect the machine by plugging in the electrical plug and assure the voltage and hertz supplied by your
electrical supplier are the same as shown on the identification tag of the machine.
• Activation procedure
- Activate the main switch (12)
- Press the
RESET
(C) button to activate the heating system
- Press the
RESET
(I) button to reset the machine
- Press the
RESET
(D) button to activate the rotating arm
• Is the rotating arm (3) turning anticlockwise?
- If so, the machine is ready for use
- If not, switch off the rotating arm (D), heating (C) and main switch (12)
• Remove the plug from the electrical socket
• Open the plug en swap the grey and black cable from position. Never change the position of the blue and
the yellow-green cable!
• Restart the activation procedure. The rotating arm (3) should now turn anticlockwise.