20
UK
Chloride Active
945044.066
4.2.1.3 Indicators
The following chart describes visual and acoustic indications when certain conditions happen. For visual
indications, only the representative LEDs are shown (the others may be ON or OFF, depending on other
operative conditions).
LED display
Indicators
Acoustic
UPS Condition
All LEDs ashing
three times
Three beeps
Start-up
sequence
LED 4 ashing.
LEDs 1, 2 & 3 off
Continuous
beep
Overload fault
LED 4 ashing.
LEDs 1, 2 & 3 off
Continuous
beep
Inverter
shortcircuit fault
LED 3 ashing.
LEDs 1, 2 & 4 off
Depending on
fault
Other UPS fault
LED 13 ashing
three times
Three beeps
Line Mode to
Battery Mode
LED 4 ON
LED 3 ON
LED 2 ON
LED 1 ON
LED 1 OFF
LED 2 OFF
LED 3 OFF
LED 4 OFF
LED 4 ON
Continuous
beep
Remote Power
Off warning
LED 4 ashing.
LEDs 1, 2 & 3 off
One beep per
second
Overload
warning
LED 2 ashing.
LEDs 1, 3 & 4 off
One beep per
second
Battery
disconnected or
battery test fault
LED 3 ashing.
LEDs 1, 2 & 4 off
One beep per
second
Charger fault
LED 1 ON, LED
13 ashing
One beep
every three
seconds
Battery Low
LED 2 ashing.
LEDs 1, 3 & 4 off
One beep
every 30
minutes
LCM Alarm (end
of battery life)
LED 8 ON
-
Site Wiring
Fault detection
enabled
LED 1 ashing,
LEDs 2, 3 & 4
OFF. LED 8 ON
Continuous
beep
Site Wiring Fault
Detected
