IRIS Touch
Engineering Manual Version 1.4 Page 25 of 40
Alarm Status Relay
Enable relay D as the alarm status indicator which if any pin Inputs (enabled) are in an alarm state
will change state depending what the default state is set to (default is normally open).
EN54-21 Fire
Set the IRIS Touch to EN54-21 Fire conformances for further details see
Section 10 “Installation for EN54-21
Compliant Fire Applications”
.
Incoming IP Addrs
As a security feature allows the user to define a list of 3 source IP addresses that are
allowed to connect to the IRIS serial port. If all addresses are left blank then all calls are
allowed.
Pin Inputs
Setup the Inputs (Pins) function between SMS messaging, SIA Alarm format, Fast format
or Contact ID alarm format.
Note: You are able to select one alarm format for the Pins (SIA, FF or CID) and then setup
individual pins to be SMS messaging if required.
When changing the pin format between one of the alarm formats (SIA, FF or CID) you will receive a warning message
indicating that all pins will be setup for this alarm format and returned to the default allocation shown below, as pins
cannot be setup to different alarm formats.
SMS (IRIS 600NG or 640NG)
On input ‘Set’ (open circuit) and input ‘Restore’ (close circuit) the IRIS Touch will send the configured SMS message
for the ‘Set’ or ‘Restore’ text, to the configured phone number.
Selecting SMS for the input format will display the following options to configure for each pin as shown.
Monitor Cable
The option to monitor the input for tamper will also be given. See
Section 7.5 “Pin Inputs”
.
Enable
Enable/disable each pin input with the ‘Enable’ tick box.
Inverse
The function of the inputs ‘Set’ and ‘Restore’ can also be inverted to be the opposite way round by ticking the
‘Inverse’ tick box. This will mean that the ‘Set’ is now the closed circuit and the ‘Restore’ is open circuit.
Phone no
Phone number used to send the SMS messages.
Set msg / Restore msg
Setup the ‘Set’ and ‘Restore’ messages to be sent to the entered phone number. The maximum length for the text
message is 24 characters.
