7
When the freezer temperature setting function is not active, press the “Freezer” key for the first time, then
the icon of the current temperature modes starts flashing, with the freezer temperature subjected to
change. At this point, press the “Freezer” key again, then the freezer temperature values will cycle as
following:
-18
→
-20
→
-22
→
-24
→
（
fast freezing
）
→
-16
→
-18
；
During the freezer temperature setting process, the icon of the selected temperature mode keeps flashing,
and if no key operation within 5 seconds, it stops flashing, with the freezer temperature setting taking effect
automatically.
Fast freezing
When the Fast Freezing function
is enabled, the freezer temperature will be controlled at -32
℃
automatically, and after 26 hours of running, the Fast Freezing function gets exited automatically. Cooling
down the freezer temperature in a rapid manner helps preserve foods against nutrition loss and keep them
fresh as ever.
Quick cooling
When the quick cooling
function is activated, the fridge temperature will be controlled at 2
℃
.
Door open alarm
If any door is open for more than 3 minutes, buzzer alarms will be continuously issued, which can be
stopped when any key is pressed, but will be restored after 3 minutes if the door keeps open. The alarms
will not be lifted until the door is closed.
Power cut memory
In the case of power failure, the refrigerator will maintain the running state that is set before the power
outage when the power supply is restored.
Power-on delay
In order to protect the refrigerator compressor from being damaged in the case of short-time power failure
(i.e., less than 5 minutes), the compressor will not be started immediately after it is powered on.
Fault alarm
S/N
Fault Types
Item Information
1
Fridge sensor fault
The corresponding indicator light of 2
℃
keeps flashing,
while all the other fridge indicator lights are ON.
2
Ambient temperature
sensor fault
The corresponding indicator light of 4
℃
keeps flashing,
while all the other fridge indicator lights are ON.
3
Freezer sensor fault
The corresponding indicator light of -16
℃
keeps flashing,
while all the other freezer indicator lights are ON.
4
Freezer evaporator sensor
fault
The corresponding indicator light of -18
℃
keeps flashing,
while all the other freezer indicator lights are ON.
5
Communication fault
The indicator lights of Quick Cooling and Fast Freezing
keeps flashing synchronously, while all the other indicator
lights are ON.
Instructions for food storage
Precautions for use
•
The appliance might not operate consistently (there is possibility of defrosting or temperature
becoming too warm in the frozen food compartment) when sited for an extended period of time below
the cold limit of the temperature range for which the refrigerating appliance is designed
•
The information of climate type of the appliance is provided on the rating plate.
•
The internal temperature could be affected by such factors as the location of refrigerating appliance,
ambient temperature, and frequency of door open, etc., and if appropriate, a warning that setting of
any temperature control device might have to be varied to allow for these factors should be made.
•
Effervescent drinks should not be stored in the freezer compartment or the low-temperature
compartment, and some products such as water ices should not be consumed too cold.
