5
Note: Due to technological innovation, the product descriptions in this manual may not be completely
consistent with your refrigerator. Details are in accordance with the real product.
Preparations for Use
Installation location
•
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not
locate the refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus
guaranteeing the refrigeration effect while saving energy consumption. Do not locate the refrigerator in the
damp place, so as to prevent the refrigerator from rusting and leaking electricity. The result of the total
space of the room in which the refrigerator is installed being divided by the refrigerant charge amount of
the refrigerator shall not be less than 8 g/ M
3
.
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
•
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least
30mm
of free space
should be spared at the top side, more than 100mm on both sides, and above 50mm at the back side of the
refrigerator.
。
Dimensions in mm
W
D
H
A
B
C(°)
E
F
839
637
1763
1447
1013
140
50
100
Note: Figure 1, Figure 2 only as a product space demand size schematic diagram.
•
Level ground
LED Light
Bottle frames (refrigerator)
Shelves (refrigerator)
Crisper (refrigerator)
Drawer (refrigerator)
Drawer (freezer)
Crisper (freezer)
Shelves (freezer)
Bottle frames (freezer)
