Chippmann CS-8 DST2 Owner'S Manual Download Page 7

 

CS-8 Series DST2 Rev1.0, Dec. 2018 

 

-5-

Schippmann electronic musical instruments

 does not accept claims for 

damages of any kind, especially consequential loss or damage, direct or 
indirect of any kind however caused. Liability is limited to the value of this 
product. The general terms of business drawn up by 

Schippmann electronic 

musical instruments

 apply at all times. 

 

Please note: 

The controls are 

no

 

real-time controllers!

 Tweak them carefully 

since we cannot be held liable for “abused” potentiometers and jacks. 

 
 
2. CE AND FCC COMPLIANCE STATEMENTS 

 
This  device  has  been  tested  and  deemed  to  comply  with  the 

DIN  EN  60065

 

standards.  
 
This  device  has  been  tested  and  deemed  to  comply  with  the  requirements, 
listed  in FCC  Regulations,  part  15.  The  device complies  with 

EN 55103-1

  and  

EN 55103-2

 standards. 

 
Because  of  the  entirely  analogue  construction,  this  d evice  d oes  not  generate 
radio  frequencies  and  will  not  interfere  with  radio  frequencies  generated  by 
other electronic devices. 
 
 

3. DISPOSAL 

 
This device has been manufactured to RoHS-standards, in compliance with the 
requirements of the European parliament and council and is thus free of lead, 
mercury, and cadmium. 
 

!!  Not ice:  This  product   is  st ill  special  wast e  and  is  not   t o  be  disposed  of 
through regular household waste !! 
 
For disposal, please contact your local dealer or 

Schippmann electronic 

musical instruments 

 

 

4. SAFETY INSTRUCTIONS

 

Summary of Contents for CS-8 DST2

















Reviews: