Chippmann CS-8 DST2, Owner'S Manual, Page: 11 / 16

CS-8 Series DST2 Rev1.0, Dec. 2018
-9-
1. Input Controller – attenuates the incoming audio signal at
jack 3
between 0 and 1
2. Drive Controller – drives the input signal at
jack 3
into the saturation or
hard clipping, resp. from 1% to 100%
3. Input jack (input) – routes the applied signal via
Cont. 1
to the distortion
input
4. Out jack (output) – provides the distortion output signal
7.2 Back
Fig. 2 shows the back of the module with consecutively numbered elements.
Fig. 2