Chippmann CS-8 DST2, Owner'S Manual, Page: 4 / 16

CS-8 Series DST2 Rev1.0, Dec. 2018
-2-
PREFACE
First of all, congratulations on the purchase of this 3U Eurorack synthesizer
module. This manual contains a condensed description of the functionality
and addresses users with a certain level of elementary technical knowledge.
The CS-8
DST2 is a very effective and very low noise distortion based on the
principle of band saturation. It is working as a 2-band -d istortion, where the
input signal will be spectral separated via a crossover network at a crossover
frequency of 113 Hz feeding afterwards the respective distortion stages. By
this a more d etailed result can be obtained without loss of warmth. It is
d esigned for mounting into a 3U Eurorack with an internal +/- 12V power
supply.
The technical principle is borrowed our well-known prod uct "ebbe und flut"
and highly improved in respect of inherent noise by substitution of electronic
components.
Design and implementation meet highest technical standards concerning
usability, sound quality, and signal-to-noise ratio. The front panel is made from
powdered and printed piece of aluminium sheet metal of 2 mm gauge. The
entire design and production work was done in Germany.
Made in Germany