fig. 3
fig. 4
4
FRONT AND BACK WHEELS
FRONT WHEELS SWIVEL FUNCTION
fig. 5
In order to assemble each of the front wheels, place the wheel with pressure to the front
tubes of the stroller, as shown in
fig.3
, until it locks. You must hear a click. Make sure the
wheels are well fixed.
Mount each of the back wheels to the tube which connects them in the direction shown in
fig. 4a
and
fig. 4b
.
Mount with pressure the connected back wheels to the back tubes of the stroller as shown
in
fig.4c
, until you hear a click and the buttons located in the inner side of the tubes pop up
though the openings of the plastic part of the wheel.
The front wheels can move in straightforward direction or in swivel mode (360°).
When you push down the levers, the wheels will freely turn at 360°
(fig.5)
. When you lift the
levers up, the wheels will move in straight direction.
ATTENTION!
When you use the stroller on uneven surfaces, fix the front wheels in position
for straight direction! For even surfaces use the swivel function of the front wheels. These
options allow for easier movement and the wheels will not wear out or damage quickly.
