fig. 20
fig. 21
A
B
8
BACKREST POSITIONS
PLACING AND ADJUSTING THE SAFETY HARNESSES
There are 4 reclining back positions. To adjust the back position, lift up and hold the plastic
holder perpendicularly to the back
(fig. 20)
. Then lower the backrest and adjust it in the
required position
(fig. 21)
. To adjust the backrest in an upper position, you must push it
upwards with your hand until you reach the desired position. You must hear a click.
Join the clasps of the shoulder and waist harnesses as shown in
fig.21а
. Make sure that
the harnesses are not twisted and fit the child well. If their length needs to be adjusted, use the
regulating rings/clips. Fix the joined clasps in the uniting buckle
fig.21b
.
To unbuckle the harness, push the two buttons in the centre of the buckle and pull them
out.
ATTENTION!
You must always use the safety harnesses when the child is in stroller, even
for a short time and the child must be looked after.
