5
fig. 5
fig. 6
fig. 7
Press with your foot the down part of the brake pedal in order to activate the parking device
(fig.4)
. Make sure the parking device is engaged. Push gently the stroller – it should not move.
Press with your foot the upper part of the brake pedal in order to de-activate the parking
device
(fig.3)
.
ATTENTION!
When the stroller is not in motion, always use the parking device! Never
leave the stroller on a slope, even if the parking device is engaged if there is a baby in it!
The chassis is equipped with a hinge mechanism. When you move the pedal of the hinge
to the left
(fig.5)
, the chassis can move left and right. This is used to maneuver easily when
pushing the stroller.
To lock this mechanism, you must block the hinge mechanism by moving the pedal to the
right
(fig.6)
. The hinge will lock after you move the pedal.
Press the button in the center of the handle and adjust it in one of the 4 positions by pulling
it up or pushing it down
(fig.7)
. When you slide the handle, you will feel the different positions.
When you release the button, the handle will be fixed in one of the positions.
ADJUSTING THE HEIGHT OF THE HANDLE
