4
UNFOLDING THE STROLLER
FRONT WHEELS AND REAR WHEELS. PARKING DEVICE
fig. 1
fig. 2
front wheel
rear wheel
fig. 3
fig. 4
To unfold the stroller, pull up the red lever for
automatic locking
(fig.1)
. At the same time grab the
stroller’s handle and pull upwards until the stroller
opens fully and you hear a click sound.
ATTENTION!
Before each use check if all
locking mechanisms are engaged and the stroller is
fixed in unfolded position.
Front and rear wheels are mounted are assembled and disassembled in the same way.
You must press the quick release button, which is located at the outer side of each wheel,
and insert the front and rear wheels in the corresponding openings on the front and rear axles
(fig.2)
, then release the buttons to fix the wheels.
ATTENTION!
The good working order of the buttons is important for the correct and safe
use of the stroller.
IMPORTANT!
Do not switch places of the front and rear wheels, because the parking
device is on the rear wheels.
The parking device is mounted on the rear wheels and is activated by a pedal.
