Chipolino Adora, Instruction Manual

Page: 6 / 13

5
15 – FOLDING THE STROLLER
IMPORTANT! Before folding the stroller, always activate the parking device and empty the storage
basket.
15-1 – Remove the seat unit from the stroller frame.
15-2 – Move the button on the second lock to the left and at the same time press the folding button.
15-3, 15-4 – Press the handle down until the stroller is fully folded and the transport hook is locked.
Note: The transport hook of the stroller is fixed automatically.
16 – TRANSFORMING THE SEAT INTO COT
Unfasten the belts underneath the seat.
CAUTION! WHEN THE SEAT IS IN CARRY COT MODE, IT MUST BE IN REARWARD POSITION –
CHILD FACING THE PARENT.
IMPORTANT! When the seat is transformed in carry cot, always remove the safety belts or tuck them to
the sides of the seat and cover them with a pad/mattress/ with thickness up to 20 mm.
17 – TRANSFORMING THE COT INTO SEAT
Fasten the belts underneath the seat as shown in the picture.
18 – INSTALLATION AND REMOVAL OF CAR SEAT “MILO” ON FRAME OF STROLLER ADORA
ATTENTION! ALWAYS INSTALL THE CAR SEAT IN REARWARD POSITION – CHILD FACING THE
PARENT.
You can install the car seat on the frame of this stroller using adaptors.
Installation: Install the adaptors on the car seat. Place the car seat with adaptors on the adaptors of the
frame and press until you hear a click.
Removal: Pres the removal buttons and take out the car seat form the frame.
release the
transport hook
1-1
1-2 1-3
“click”