Chipkin FS-8705-12 Driver Manual Download Page 28 | Manualshive

Page: 28 / 30

Chipkin FS-8705-12 Driver Manual Download Page 28

FS-8705-12 Federal Signal Ultravoice - Electronic Siren Controllers Driver Manual

Page 28 of 30

© 2021 CHIPKIN AUTOMATION SYSTEMS

FSU_ESC:#13 Err. Cmd=%s not recognized If this message is printed please take a log, send

the log to Tech Support using email and follow up
with a call.

FSU_ESC:#14 Err. Recieved Cmd=%s.
Require DA with name=%s to Store

If this message is printed please take a log, send
the log to Tech Support using email and follow up
with a call.

FSU_ESC:#15 Err. Cmd=%s not
recognized.

If this message is printed please take a log, send
the log to Tech Support using email and follow up
with a call.

FSU_ESC:#16 Err. Recieved Cmd=%s.
Require DA with name=%s to Store.

If this message is printed please take a log, send
the log to Tech Support using email and follow up
with a call.

FSU_ESC:#17 Err. Cmd=%s not
recognized.

If this message is printed please take a log, send
the log to Tech Support using email and follow up
with a call.

FSU_ESC:#18 Err. Recieved Cmd=%s.
Require DA with name=%s to Store.

If this message is printed please take a log, send
the log to Tech Support using email and follow up
with a call.

FSU_ESC:#19 Err. Recieved Cmd=%s.
Require DA with name=%s to Store.

If this message is printed please take a log, send
the log to Tech Support using email and follow up
with a call.

FSU_ESC:#20 Err. Recieved Cmd=%s.
Require DA with name=%s to Store.

If this message is printed please take a log, send
the log to Tech Support using email and follow up
with a call.

FSU_ESC:#21 FYI. Use an Array called
<%s> to expose diagnostic info.

Read Chapter Appendix B.3 Exposing Driver Stats

FSU_ESC:#22 Report: %s

The driver prints this message every time it
receives a status report from the controller. No
action is required and the message can be ignired.

FSU_ESC:#23 Invalid Report
Character=%d(dec)=0x%02x=%c

If a status message is not correctly composed this
message is printed. If it is printed frequently then
this probably indicates noise on the line. Please
take a log, send the log to Tech Support using
email and follow up with a call.

«
...
26
27
28
29
30
»

Summary of Contents for FS-8705-12































Reviews:

No comments