MCDV2HD 1080P Motorcycle DVR 12
Standard Full Time Recording Mode
With the device in any mode (Video recording, Standby or Recording mode,
press either button on the wired controller. The device will then automatically
save video file with the name (KEY-XXXX.AVI ). This is the same file type as
EVE.XXXX.AVI. These files
will not be overwritten
automatically. When the
micro-SD is full, only the normal files (REC.XXXX.AVI) will be overwritten. This is
why we recommend regular reformatting.
Pre-Record Mode
In the
Pre-Record
mode the DVR will start but NOT record to the SD card until
the wired, handlebar controller button is pressed. It will blink rapidly and you
will know it is recoding.
The recording will start 10 seconds prior to when you pressed the button and
continue for the
Loop Recording
time set which allows a longer riding period,
only capturing the periods selected instead of the entire trip. By DEFAULT this
function is OFF and you can change the setting to use it but remember that you
need to press the button every time you want to save a recording.
Please Note
This function requires rider activation using the wired
controller and should not be used by novice riders or any other rider not
capable or confident to do so safely.
Video Data Backup
Chipatronic strongly recommends that you backup your video data before
reformatting the micro-SD card. Remove the micro-SD card from the device,
then insert it into a card reader connected to your computer. You may then list,
open, view, or backup your video files. You may also choose to delete or protect
files or reformat your micro-SD card.
Power on test
Before installing the kit, and for the first-time use of the device, Chipatronic
recommends using the USB cable provided in the package instead of the main
power supply. Connect the USB cable to a charger DC-5V, computer USB port or
other USB outlet. With power on, test the device for normal recording and other