05
c) Before the extension bar at the center of the auxiliary contacts
touches the starter, use a screwdriver to push the central slot of the auxiliary
contacts so it stays at the top;
d) Push the auxiliary contacts towards the starter, press and hold the
blue button at the end of the auxiliary contacts and fit it into the starter;
e) After fitting the auxiliary contacts, break and make the starter for 5 –
10 times, check if the slot at the center of the auxiliary contacts can move
together with the starter reliably. In the meantime, check if the auxiliary
contacts are powered-on normally; if there is any abnormality, repeat step a)
– step d).
a
）
b
）
c
）
d
）
Figure 3 Assembley method for NS2-AU(80B)
