－
60
－
13.3 Display settings
13.3.1 Channel parameter
・
Proceed from the MENU settings.
・
Move the focus to the setting item using direction key.
・
By pressing the ENTER key on the item for setting, the screen moves to the input screen.
By selecting the display settings on the setting menu screen and then selecting the channel parameters,
the following screen is displayed.
Set the wave pattern type, maximum/minimum values of the display scale, color and the display position
of each channel.
■
Setting the display scale
The data are displayed on the screen with the setting contents of the display scale.
Item Contents
Type
“Standard”: Min and Max values can be set in the range of ±30000.
The screen is displayed in the standard format.
“Exponent”: Min and Max values are set in the exponent format. The
screen is also displayed in the exponent format.
The significand of Min and Max values is 1 to 9.99 and the
exponent part can be set in the range of ±15.
Min, Max
In the trend display, the Min value is positioned at the extreme left (low)
and the Max value is positioned at the extreme right (up) by coordinate
calculation. ( ) for horizontal direction
When there are multiple channels displayed at the same position, the
Min and Max values of the channel with the smallest number are
displayed on the scale plate and the Min and Max values of each
channel are used for the coordinate for each pen.
The Min and Max values are displayed with the number of digits after
decimal point displayed in the screen.
Summary of Contents for KR2000
Page 27: ... 25 ＭＥＭＯ ...
